Concrete driveways in Glen Waverley, 3150
Concrete driveway installation for Glen Waverley homes, from replacement of original 1960s driveways on the established blocks between Brandon Park and The Glen to new driveways on knock-down rebuilds across the 3150 postcode. Every driveway is built the same way: proper site preparation, steel reinforcement, correct drainage fall and a Monash Council compliant crossover, delivered on one fixed quote.
Ground conditions in Glen Waverley
Glen Waverley sits on reactive clay, in common with most of the City of Monash. The clay expands in winter and contracts through summer, and a slab poured directly onto it, as most of the suburb’s original driveways were, will eventually crack along the centre and drop at the crossover. This is the single most common reason for driveway replacement in the area.
The correct response is in the preparation, not the concrete thickness. The old surface is removed and the area prepped, with base material brought in and compacted where the ground needs it, a membrane where required, and steel mesh reinforcement. Control joints are cut to direct any movement to a planned line.
Drainage on Glen Waverley blocks
A significant proportion of blocks between Waverley Road and the Jells Park side fall towards the house. Where that is the case, a grated strip drain across the garage threshold is specified as part of the driveway rather than left as an afterthought. Drainage is assessed and priced at the site measure, and the recommendation is given in writing with the quote.
Finishes suited to Glen Waverley
Exposed aggregate in charcoal or mid grey stone is the most common specification for street-facing driveways in the suburb. It conceals tyre marking and the fine clay dust from nature strips, and it complements the rendered contemporary homes replacing the original housing stock. For side driveways leading to a rear garage, a broom finished plain concrete driveway provides the same structural performance at around a third less.
Concrete driveway cost in Glen Waverley
A standard single driveway in Glen Waverley is 40 to 50 square metres. Plain concrete with a broom or trowel finish runs $95 to $130 per m², coloured concrete $115 to $160 and exposed aggregate $130 to $185, all supplied and laid with the base preparation described above. Removal of an existing driveway adds $35 per m². A replaced single driveway in exposed aggregate typically falls between $7,500 and $10,000, and the quote issued after the site measure is fixed. The driveway cost guide sets out what moves the price.
City of Monash crossover permits
Glen Waverley, Mount Waverley, Clayton, Oakleigh and Mulgrave. Monash is our home council and the one we deal with most. Permits are usually turned around within a couple of weeks and council inspects the boxing before the pour.
Monash requires a vehicle crossing permit before the crossover is touched, with the crossover built to the council's standard and an inspection prior to pouring.
Nearby suburbs we also cover
Mount Waverley. See the full South East list.
